Architectural comparison of commercial façade materials including stone composite, reconstituted stone, timber, aluminium, fibre cement and GRC cladding supplied by Dalply.

How to Choose the Right Façade Material for a Commercial Building


Choosing the right façade material involves more than appearance. Learn the key considerations when specifying stone composite, reconstituted stone, timber, aluminium, fibre cement and GRC façade systems.

The external façade plays an important role in both the appearance and performance of a commercial building.

Today’s architects can choose from a wide range of façade materials, each offering different visual characteristics, fixing methods and technical properties. Stone composite, reconstituted stone, natural timber, aluminium, fibre cement and glass reinforced concrete (GRC) are all used on commercial developments throughout the UK.

Rather than asking which material is “best”, a more useful question is:

Which façade material is most appropriate for this particular project?

The answer depends on the design objectives, project requirements and the technical characteristics of the selected system.

This guide outlines some of the key considerations during façade material selection.


Start with the Design Intent

The desired appearance often helps narrow the choice of material.

Some projects seek the appearance of natural stone, while others may favour timber, metal or smooth contemporary finishes.

For example:

  • stone composite panels provide natural stone surfaces using crushed stone
  • reconstituted stone panels offer the appearance of stone in manufactured panel form
  • natural timber panels provide genuine timber grain and variation
  • aluminium systems can create clean linear façades, battens and screening features
  • fibre cement panels are available in numerous colours and finishes
  • GRC can be manufactured in a wide variety of architectural forms and profiles

Visual intent is usually one of several factors considered during specification.


Consider the Building Type

Different commercial sectors often have different priorities.

Education buildings may prioritise durability, maintenance and appearance.

Healthcare projects may have specific design and operational requirements.

Commercial offices may seek contemporary architectural finishes.

Hospitality projects often place significant emphasis on aesthetics.

Every project should be assessed against its own specification rather than relying on previous material choices.


Understand the Available Material Categories

Stone Composite

Stone composite façade panels combine natural stone with a manufactured panel construction.

For example, Steni Nature incorporates crushed natural stone on the visible surface and is designed for ventilated façade systems.

Stone composite panels are selected on many commercial projects where architects wish to achieve the appearance of natural stone in a panelised façade system.


Reconstituted Stone

Reconstituted stone panels are manufactured primarily from natural stone materials and binders.

Petrarch panels are manufactured in the UK and are available in an extensive range of colours and textures for rainscreen façade applications.

These systems offer an alternative architectural expression to traditional natural stone construction.


Natural Timber

Natural timber remains a popular façade material because of its distinctive appearance and variation.

Engineered timber façade systems such as Parklex Prodema incorporate real timber veneer and are designed for ventilated façade applications.

Because timber is a natural material, variation in grain and colour forms part of its appearance.


Aluminium

Extruded aluminium systems are widely used for battens, screening and cladding.

Systems such as those manufactured by ForMe Design are available in a variety of profile sizes and finishes, including wood-effect finishes and RAL colours.

Aluminium can also be incorporated into façade features such as screens, soffits and architectural detailing.


Fibre Cement

Fibre cement façade panels are used on commercial buildings across many sectors.

Manufacturers offer a wide range of colours, textures and fixing methods.

Individual products vary between manufacturers and should always be assessed using the relevant technical documentation.


Glass Reinforced Concrete (GRC)

GRC combines cement with glass fibres to produce architectural façade components.

Depending on the design, GRC can be manufactured in flat panels, profiled units or complex three-dimensional forms.

This flexibility allows architects to incorporate bespoke façade features where required.


Appearance Is Only One Part of the Decision

Visual appearance is important, but façade specification normally considers many additional factors.

These may include:

  • project location
  • building height
  • structural support
  • fixing method
  • panel size
  • colour availability
  • surface finish
  • maintenance requirements
  • reaction to fire
  • environmental documentation
  • warranties
  • installation methodology

The weighting given to each consideration will vary between projects.


Think About the Whole Façade System

A façade panel should not be considered in isolation.

The overall wall construction may include:

  • subframe
  • insulation
  • cavity
  • cavity barriers
  • fixings
  • brackets
  • membranes
  • flashings
  • interfaces with windows and doors

The compatibility of these components should be considered as part of the complete façade design.


Review the Technical Documentation

Before specifying any façade material, architects typically review the supporting technical information provided by the manufacturer.

This may include:

  • technical data sheets
  • installation guidance
  • reaction-to-fire classifications
  • environmental documentation
  • warranties
  • CAD details
  • BIM objects
  • NBS specification clauses
  • test reports
  • maintenance guidance

The exact documentation available will vary between manufacturers and products.


Samples Remain an Important Part of Specification

Photographs can help communicate appearance, but physical samples remain valuable during material selection.

Viewing samples allows project teams to assess:

  • colour
  • texture
  • finish
  • scale
  • joint appearance
  • compatibility with adjacent materials

Where appropriate, larger sample panels or project mock-ups may also form part of the design process.


Early Product Selection Can Support Project Coordination

Identifying the preferred façade system early in the design process allows greater coordination between the design team, specialist contractors and suppliers.

This may assist with:

  • panel layouts
  • setting out
  • interfaces
  • fixing details
  • material lead times
  • procurement planning

Early coordination can also reduce the likelihood of design changes later in the project.


Working with Dalply

Dalply supplies a range of façade systems from leading European and UK manufacturers, including:

  • Steni stone composite façade panels
  • Petrarch reconstituted stone panels
  • Parklex Prodema natural timber façades
  • ForMe Design aluminium cladding and battens
  • Fibre cement façade systems
  • Glass reinforced concrete (GRC) façade systems

Rather than promoting a single solution, we work with architects, façade consultants, contractors and installers to understand the requirements of each project and provide product information, technical guidance and samples to support the specification process.

Every commercial project is different, and the most appropriate façade material will depend on the design objectives, technical requirements and supporting documentation for the chosen system.

If you are assessing façade materials for an upcoming project, the Dalply team can provide product literature, samples and technical information across our range of commercial cladding systems.

Need support with your next façade specification?

Visit https://dalply.co.uk to explore our product range or speak to our team about your project.