Building a Fire Proof Future

Following the outcome of the major safety inquiry into the fire safety of tall buildings, it has been established that combustible cladding has been an important factor in the cause and spread of fires over the last ten years in the U.K. The devastating impact of these fires is a serious issue that must be considered carefully by the construction industry.

Both government and public scrutiny alongside new legislation and regulations have created a high profile urgent need for safety issues around cladding to be solved when building or looking to build high-rise properties.

Challenges for Architects, Developers and Project Managers

New Legislation

From August 2021 all developers must provide evidence that they have considered fire safety when planning the construction of high-rise residential buildings.

There are now recommendations for either a fire engineer or similarly qualified professional to undertake checks on fire safety before planning is given and the building can go ahead.

Gateway Policy

Buildings, both residential and educational, that are higher than 18m (England) or 11m (Scotland) are subject to new Gateway controls.

There are three main points for consideration:

1. Gateway One (Planning): Planning Applicants are obliged to demonstrate that they have considered fire safety. A statutory requirement regarding expert safety advice from the HSE is in place from 1 August 2021 for local authorities before planning permission can be given.

2. Gateway Two (Technical Design and Construction): Construction cannot begin until the Building Safety Regulator (BSR) has approved a building control application.

3. Gateway Three (Building Control and Final Certificate): The BSR will carry out a full final inspection before issuing a completion certificate. This hard stop requires documents and information on the building to be handed to the responsible person (accountable person in occupation).

Professional Indemnity Insurance

There is a requirement for architects to take out sufficient Professional Indemnity Insurance to cover a claim.

The problem is that securing an affordable rate for indemnity insurance is tricky since many policies now have exclusions for fire. Those policies with full coverage come at an inflated premium that is often out of reach for smaller businesses.

Being without coverage for fire or accepting rising costs of up to three times previous renewal costs is making life difficult for architects and often leading to having to accept exclusions for either cladding or fire. Taking out insurance below the recommended coverage in the Architects Code will surely lead to legal and financial problems for individuals and practices in the future.

A1 and A2 Materials

The high risks within the construction and building design industries have led to insurers excluding materials with less than an A2 rating. This will increase costs for developers who will now need to use materials rated A2 and above to be covered.

Challenges for Buyers and Sellers

Owners of apartments in tower blocks are now required to have an EWS1 (External Wall Review Form) to prove that a building is safe. This form shows details of the assessments on the construction of the outside wall of residential buildings that are over 18 metres or buildings with specific concerns.

Buyers are increasingly finding that lenders will not lend money to purchasers if the seller cannot provide an EWS1 form.

The EWS1 should be completed by someone authorised by the Royal Institution of Chartered Surveyors (RICS), UK Finance and the Building Societies Association.

It is therefore important that any cladding is safe and meets all the new fire regulations so that the form can be obtained without any delay enabling properties to be sold quickly and without problems.

Fireproof Cladding Solutions

With plastic no longer an appropriate material for cladding, as it is highly flammable, other materials must be utilised to meet current building regulations on current and future developments.

The following products have all been chosen for their high quality, technological advances, and ability to meet the A1 and A2 fire rating standards.

Share this Image On Your Site – Please Include Attribution to

<!– HTML Code –>
<a href=”” target=”_blank”><img src=”” alt=”Building a fire proof future” class=”GeneratedImage”></a>

“Building a Fire Proof Future” by Dalply , Dalply is licensed under CC BY-SA 4.0

FOAMGLASS Insulation

The FOAMGLASS fixing system provides high thermal performance without adding thickness and is rated A1 for fire safety.

Benefits of FOAMGLAS:

· A1 Fire Rated
· High-quality materials
· Minimal maintenance
· Excellent insulation properties
· Protection against moisture and damp
· Made with cellular glass that prevents fire spread and does not produce toxic gases or flaming droplets.

Fibre Cement Cladding

Fibre Cement Cladding (Fibre cement weatherboard/fibre cement rain screen) combines cellulose-fibre and cement composite to protect the outside of buildings.

Benefits of Fibre Cement Cladding:

· A2 Fire Rating
· Highly durable
· Low maintenance
· Easy installation
· Long-lasting
· Weather-resistant
· Attractive

Brick Slips Systems

This innovative cladding solution provides excellent thermal performance with a traditional feel.

Benefits of Brick Slips Systems:

· A1 Fire Rated (up to 100m high)
· Cost-effective as it can be used without pointing.
· Can be used with non-combustible insulation
· Easy Installation
· Both domestic and commercial uses

Porcelain Cladding

Porcelain cladding comes in two formats.

Large-format porcelain cladding is extremely lightweight adding only a very small load to a building. Perfect for use on timber frames, steel frames and concrete structures. Its flexibility is ideal for ventilated facades and EWIS.

Technical porcelain format uses advanced technology and natural stone properties to create a superior product with a highly attractive finish.
Both types are lightweight and have a wide range of finishes and colours that can enhance the look of a building.

Benefits of Porcelain cladding
· A1 Fire Rated
· Lightweight
· Easy Installation
· Waterproof
· Large format
· Eco-friendly

GRC Cladding

GRC cladding is manufactured from glass fibre and concrete with lightweight panels that have excellent weatherproof properties that meet the highest fire safety standards. It can be ordered in a variety of shapes and sizes to suit any building.

Benefits of GRC Cladding:
· A1 Fire Rated
· Low maintenance
· Lightweight but durable
· Versatile sizing and shapes
· Eco-friendly

Aluminium Cladding

Aluminium cladding is a timber coated veneer over an aluminium substrate. Giving the appearance of solid timber it uses 98% less wood in production than solid timber cladding. Production and materials combine to give this cladding an attractive natural appearance that lasts.

With only a 0.5mm wood veneer, this aluminium cladding has a wide variety of profiles and panels for the ultimate design choice.

Benefits of Aluminium cladding:
· A2 Fire Rated
· Low maintenance
· Resistant to rot and fungal decay
· Attractive natural finish
· Suitable for buildings over 18 metres

Contact us today for a free quote!

Or call us now to speak to an expert on 0131 564 0402.